Hi all,
I have 2 hybrid runtimes. One in GCP and another in AWS. They're both connected using VPN.
Below is nodetool status output from GCP runtime:
Datacenter: aws-apse1
====================
Status=Up/Down
|/ State=Normal/Leaving/Joining/Moving
-- Address Load Tokens Owns (effective) Host ID Rack
UN 10.128.1.9 45.54 MiB 256 100.0% a267c64e-6d49-434b-8f85-7f9d56fe05e4 ra-1
UN 10.128.2.237 46.19 MiB 256 100.0% ab29fe36-eae5-47c7-a532-102c6b1a1ff2 ra-1
?N 10.128.3.110 45.12 MiB 256 100.0% 955d5e34-0d58-4d61-befb-8d22dbdcf451 ra-1
Datacenter: gcp-asse1
===================
Status=Up/Down
|/ State=Normal/Leaving/Joining/Moving
-- Address Load Tokens Owns (effective) Host ID Rack
UN 10.0.2.7 44.05 MiB 256 100.0% 47130851-1a50-47e0-827b-02733099b549 ra-1
UN 10.0.3.184 44.66 MiB 256 100.0% d3bfff87-2ffb-404d-89c2-ef22651634af ra-1
UN 10.0.4.44 43.43 MiB 256 100.0% 9054b721-3713-4c7d-8115-0c73d9c7b28c ra-1
Below is the nodetool status output from AWS runtime:
Datacenter: aws-apse1
====================
Status=Up/Down
|/ State=Normal/Leaving/Joining/Moving
-- Address Load Tokens Owns (effective) Host ID Rack
UN 10.128.1.9 45.54 MiB 256 100.0% a267c64e-6d49-434b-8f85-7f9d56fe05e4 ra-1
UN 10.128.2.237 45.89 MiB 256 100.0% ab29fe36-eae5-47c7-a532-102c6b1a1ff2 ra-1
UN 10.128.3.110 45.7 MiB 256 100.0% 955d5e34-0d58-4d61-befb-8d22dbdcf451 ra-1
Datacenter: gcp-asse1
===================
Status=Up/Down
|/ State=Normal/Leaving/Joining/Moving
-- Address Load Tokens Owns (effective) Host ID Rack
UN 10.0.2.7 43.74 MiB 256 100.0% 47130851-1a50-47e0-827b-02733099b549 ra-1
UN 10.0.3.184 44.39 MiB 256 100.0% d3bfff87-2ffb-404d-89c2-ef22651634af ra-1
UN 10.0.4.44 44 MiB 256 100.0% 9054b721-3713-4c7d-8115-0c73d9c7b28c ra-1
I've deleted the pod marked ?N in AWS cluster but to no avail. I've also done a nodetool repair -dc <dc-name> in each of the datacenters. The pod is still marked ?N after the repair.
Is there a way to get the pod to its normal state?
Thanks.
LinkedIn
Twitter
